CCSE-030 Series S

Range of available pin number : 11〜29 pins
Ships from Japan in 3Days after approval

Discrete and flexible cable wiring type
Product code CCSE-030S-pin number
Body Width 19mm

Product Overview

  • The products in this series are produced from a 19, 24, 33, or 44 mm wide clip mother body, with pin number rangingfrom 11 to 101 pins configured as specified by the customer.
  • As in the past, pin number from 11 and over are availableeven for the 24 mm wide clip.
  • The guide is processed individually to match the pin number and configuration specified by the customer.

Dimension of conforming
FPC/FFC terminal

General specification

Click on the picture to expand it
  • Transparent pin block
  • Orange stopper

ZZ specification

Click on the picture to expand it
  • Blue pin bloc
  • Blue stopper

Basic wiring dimension diagram

Click on the picture to expand it
  • Provided for mounting a 0.5 mm pitch FFC connector and wiring discrete cable

For cases involving
mounting
FFC connector
>>learn more

Wring method

Discrete Flex(FPC) connector
Pre-wired Wired by customer FRC Mounting connector Mounted by customer
×

Items included in this product set

● included in this product set
Contains the three items listed below:
・Clip connector main body (equipped with a guide manufactured to the customer-specified pin number)
・Guide and Flex(FPC) cable holding board lockscrew x 2 pcs.
・Flex(FPC) cable holding board set (for back and front surfaces)

●Wiring can be attached to this product by・Soldering a discrete wire・Connecting cable wiring to a 0.3 or 0.5 mm flexible on-board cable connector

●Wiring information on 0.5 mm pitch flexible cable
With the cover installed, up to 19 pins of 0.5 pitch flexible cable can be used. With flexible wiring of 20 to 29 pins, use CCSE-030M-pin number or CCSE-030M-pin number-ZZ.

FRC connector type
Product code CCSE-030S-pin number-FRC
Body Width 19mm

Product Overview

  • The products in this series are provided with an FRC connector for wiring use.
  • The FRC connector included here is of the 1.27 mm pitch type.
  • The products in this series are produced from a 19, 24, 33, or 44 mm wide clip mother body, with pin number rangingfrom 11 to 101 pins configured as specified by the customer.
  • Pin number from 11 and over are available for even the 24 mm wide clip.
  • The guide is processed individually to match the pin number and configuration specified by the customer.

Dimension of conforming
FPC/FFC terminal

General specification

Click on the picture to expand it
  • Transparent pin block
  • Orange stopper

ZZ specification

Click on the picture to expand it
  • Blue pin bloc
  • Blue stopper

Basic wiring dimension diagram

Click on the picture to expand it

With 32-pin FRC connector

Wring method

Discrete Flex(FPC) connector
Pre-wired Wired by customer FRC Mounting connector Mounted by customer
× × × ×

Items included in this product set

Items included in this product setContains the three items listed below:
・FRC connector-fitted clip connector main body (equipped with a guide manufactured to the customer-specified pin number)
・Guide and Flex(FPC) cable holding board lockscrew x 2 pcs.
・Flex(FPC) cable holding board set (for back and front surfaces)

* Note that the FRC connector used in this product is the HIF6-32, 40, 60, 80, or 100PA-1.27DS connectors made by Hirose Electric.

●Wiring can be attached to this product by・Wiring to the products in this series is accomplished using Hirose HIF6- series (2-piece, 1.27 pitch) connectors 32D, 40D, 60D, 80D, and 100D, respectively.

*For products in this series, probes are configured and guides are fabricated with respect to the center of the connector to suit the specified pin number.
*No 0.3-mm pitch flexible connector provided for wiring.

※We also provide dimensions with FRC connectors

When ordering a ZZ specification

For products made to ZZ specifications, be sure to append -ZZ to the Product no.

Example
CCSE-030S-29-ZZ
CCSE-030S-29-FRC-ZZ

Notice

The circuit board for any clip width in this series is available as a conventional 0.5 pitch flexible cable connector mountable board or as a 0.3 pitch connector mountable board. Keep in mind that the 0.5 pitch flexible cable connector may not be compatible with flexible cable connectors outside a certain range of widths.
 For the 19 mm wide clip connector, the maximum outside width of the FFC connector is 16mm.
 For the 24 mm wide clip connector, the maximum outside width of the FFC connector is 21mm.

Pricelist

Pin
number
Unit price (varies with quantity per single order) [US $] Additional
cost for FRC
Additional cost
for discrete
wiring*
1 unit 2–9 units 10–24 units 25–49 units 50 units or more
11 256 237 192 169 139 +26 +49
12 260 242 194 173 142
13 264 245 198 176 144
14 268 249 200 178 147
15 272 253 203 182 149
16 276 256 207 184 152
17 279 259 209 187 154
18 284 263 213 190 157
19 287 267 216 193 159
20 292 270 218 195 160
21 295 275 222 199 164
22 304 280 226 203 167
23 313 289 234 209 174
24 322 298 240 216 178
25 330 306 247 222 185
26 339 315 254 229 190
27 348 324 262 236 196
28 357 332 269 243 202
29 366 340 276 249 208

Discrete wired specification products have discrete wires soldered by Yokowo for the maximum number of pins for each body width.
Please order with board code “H”.
*10-color discrete wiring.
・Core diameter 0.24 mm, external insulation diameter 0.54 mm
Wire length 300 mm from board edge, ends stripped to length of 3 mm

●Volume discounts are available, based on the quantity purchased per order.

●Please note that delivery times are longer for orders of 10 units or more.

●Contact probes and guides(manufactured to suit the specified number of pins) are available as repair parts.  
>>Learn more

●Connector cables to this product are available.(It is designed for use with the 1.27 pitch FCH Series.)  
>>Learn more

Product numbers differ by board

Click on the picture to expand it

For cases involving mounting a connector for 0.3 pitch FFC

  • There are two types of circuit boards: ones for connectors on which pins on the odd-numbered side are positioned at the front and ones for connectors on which pins on the even-numbered side are positioned at the front. Referring to the example below, append the corresponding circuit board symbol to the name of the product you are ordering.

Example
Circuit board for connectors on which pins on the odd-numbered side are positioned at the front:
CCSE-030S-25D
Circuit board for connectors on which pins on the even-numbered side are positioned at the front:
CCSE-030S-31R-ZZ

For cases involving discrete wiring or mounting a connector for 0.5 pitch FFC.

  • No circuit board symbol needs to be specified.  Please order using the conventional product no.

Example
CCSE-030S-25

For specifications in that discrete wiring is soldered by Yokowo
for the maximum number of pins for each body width

  • Add the board code “H” to the end of the product code when ordering.

Example
CCSE-030S-25H
 (Wired with discrete wiring for 29 pins)
CCSE-030M-31H
 (Wired with discrete wiring for 39 pins)
※10-color discrete wiring with core diameter of 0.24 mm, external insulation diameter of 0.54 mm,
wire length of 300 mm from board edge, and ends stripped to a length of 3 mm.

On the Clip Connector Inquiry Sheet, please indicate your preferred method under the “Wiring method” column.
※Unless otherwise specified, the basic wiring pattern will be provided.