CCSE-030 Series X

Range of available pin number 60〜101 pins
Ships from Japan in 3 Days after approval

*For products in this series, probes are configured and guides are fabricated with respect to the center of the connector to suit the specified pin number.
*No 0.3-mm pitch flexible connector provided for wiring.

※We also provide dimensions with　FRC connectors

When ordering a ZZ specification

*For products made to ZZ specifications, be sure to append -ZZ to the Product no.

Example
CCSE-030X-101-ZZ
CCSE-030X-100-FRC-ZZ

Notice

The circuit board for any clip width in this series is available as a conventional 0.5 pitch flexible cable connector mountable board or as a 0.3 pitch connector mountable board. Keep in mind that the 0.5 pitch flexible cable connector may not be compatible with flexible cable connectors outside a certain range of widths.
　For the 19 mm wide clip connector, the maximum outside width of the FFC connector is 16mm.
　or the 24 mm wide clip connector, the maximum outside width of the FFC connector is 21mm.

Price List

Discrete wired specification products have discrete wires soldered by Yokowo for the maximum number of pins for each body width.
Please order with board code “H“.
*10-color discrete wiring.
・Core diameter 0.24 mm, external insulation diameter 0.54 mm
Wire length 300 mm from board edge, ends stripped to length of 3 mm

●Volume discounts are available, based on the quantity purchased per order.
●Please note that delivery times are longer for orders of 10 units or more.
●Contact probes and guides(manufactured to suit the specified number of pins) are available as repair parts.
>>Learn more
●Connector cables to this product are available.（It is designed for use with the 1.27 pitch FCH Series.）　　
>>Learn more

Product numbers differ from board

click on the picture to expand it

For cases involving mounting a connector for 0.3 pitch FFC

• There are two types of circuit boards: ones for connectors on which pins on the odd-numbered side are positioned at the front and ones for connectors on which pins on the even-numbered side are positioned at the front. Referring to the example below, append the corresponding circuit board symbol to the name of the product you are ordering.

Example
Specify symbol D if the odd-numbered side is at the front (to the left in the diagram below)
CCSE-030S-25D

Specify symbol D if the odd-numbered side is at the front (to the left in the diagram below)
CCSE-030S-31R-ZZ

For cases involving discrete wiring or mounting a connector for 0.5 pitch FFC.

• No circuit board symbol needs to be specified.　Please order using the conventional product no.

Example
CCSE-030S-25

For specifications in that discrete wiring is soldered by Yokowo
for the maximum number of pins for each body width

• Add the board code “H” to the end of the product code when ordering.

Example
CCSE-030S-25H
　(Wired with discrete wiring for 29 pins)
CCSE-030M-31H
　(Wired with discrete wiring for 39 pins)
※Core diameter 0.24 mm, external insulation diameter 0.54 mm
Wire length 300 mm from board edge, ends stripped to length of 3 mm

In the Clip Connector Inquiry Sheet, please indicate your preferred method under the “Wiring method” column.
※Unless otherwise specified, the basic wiring pattern will be provided.