Range of available pin number 40〜59 pins
Ships from Japan in 3Days after approval
Discrete and flexible cable wiring type
Product codeCCSE-030L-pin number
Body width 33mm
Product Overview
The products in this series are produced from a 19, 24, 33, or 44 mm wide clip mother body, with pin number rangingfrom 11 to 101 pins configured as specified by the customer.
（This product’s width is 33mm,pin number is 40 to 59 pins）
The guide is processed individually to match the pin number and configuration specified by the customer.
Dimension of conforming
FPC/FFC terminal
General specification
- Transparent pin bloc
- Orange stopper
ZZ specification
- Blue pin bloc
- Blue stopper
Basic wiring dimensional diagram
Provided for mounting a 0.5 mm pitch FFC connector and wiring discrete cable
For cases involving
mounting
FFC connector>>Learn more
Wiring metod
| Discrete | connector | |||
|---|---|---|---|---|
| Pre-wired | Wired by customer | FRC | Mounting connector | Mounted by customer |
| ◯ | ◯ | × | ◯ | ◯ |
Items included in this product set
- Items included in this product set
Contains the three items listed below: - Clip connector main body (equipped with a guide manufactured to the customer-specified pin number)
- Guide and Flex(FPC) cable holding board lockscrew x 2 pcs.
- Flex(FPC) cable holding board set (for back and front surfaces)
Wiring can be attached to this product by
・Soldering a discrete wire
・Connecting cable wiring to a 0.3 or 0.5 mm flexible
on-board cable connector
*For products in this series, probes are configured and guides are fabricated with respect to the center of the connector to suit the specified pin number.
*No 0.3-mm pitch flexible connector provided for wiring.
FRC connector type
Product code CCSE-030L-pin number-FRC
Body width 33mm
Product Overview
- The products in this series are provided with an FRC connector for wiring use.
- The FRC connector included here is of the 1.27 mm pitch type.
- The products in this series are produced from a 19, 24, 33, or 44 mm wide clip mother body, with pin number rangingfrom 11 to 100 pins configured as specified by the customer.
（This product’s width is 33mm,pin number is 40 to 59 pins） - The guide is processed individually to match the pin number and configuration specified by the customer.
Dimension of conforming
FPC/FFC terminal
General specification
- Transparent pin bloc
- Orange stopper
ZZ specificatios
- Blue pin bloc
- Blue stopper
Basic wiring dimensional diagram
With 60-pin FRC connector
Wirng method
| Discrete | connector | |||
|---|---|---|---|---|
| Pre-wired | Wired by customer | FRC | Mounting connector | Mounted by customer |
| × | × | ◯ | × | × |
Items included in this product set
Items included in this product set
Contains the three items listed below:
・FRC connector-fitted clip connector main body (equipped with a guide manufactured to the customer-specified pin number)
・Guide and Flex(FPC) cable holding board lockscrew x 2 pcs.
・Flex(FPC) cable holding board set (for back and front surfaces)
* Note that the FRC connector used in this product is the HIF6-32, 40, 60, 80, or 100PA-1.27DS connectors made by Hirose Electric.
Wiring can be attached to this product by
・Wiring to the products in this series is accomplished using Hirose HIF6- series (2-piece, 1.27 pitch) connectors 32D, 40D, 60D, 80D, and 100D, respectively.
*For products in this series, probes are configured and guides are fabricated with respect to the center of the connector to suit the specified pin number.
*No 0.3-mm pitch flexible connector provided for wiring.
※We also provide dimensions with FRC connectors
When ordering a ZZ specification
For products made to ZZ specifications, be sure to append -ZZ to the Product no.
Example
CCSE-030L-59-ZZ
CCSE-030L-59-FRC-ZZ
Notice
The circuit board for any clip width in this series is available as a conventional 0.5 pitch flexible cable connector mountable board or as a 0.3 pitch connector mountable board. Keep in mind that the 0.5 pitch flexible cable connector may not be compatible with flexible cable connectors outside a certain range of widths.
For the 19 mm wide clip connector, the maximum outside width of the FFC connector is 16mm.
or the 24 mm wide clip connector, the maximum outside width of the FFC connector is 21mm.
Price List
| Pin number |
Unit price (varies with quantity per single order) [US $] | Additional cost for FRC |
Additional cost for discrete wiring* |
||||
|---|---|---|---|---|---|---|---|
| 1 unit | 2–9 units | 10–24 units | 25–49 units | 50 units or more | |||
| 40 | 442 | 412 | 335 | 304 | 255 | +39 | +99 |
| 41 | 448 | 417 | 339 | 309 | 259 | ||
| 42 | 455 | 424 | 345 | 314 | 263 | ||
| 43 | 460 | 429 | 349 | 318 | 268 | ||
| 44 | 467 | 435 | 355 | 323 | 272 | ||
| 45 | 474 | 442 | 360 | 328 | 276 | ||
| 46 | 480 | 448 | 365 | 333 | 279 | ||
| 47 | 486 | 454 | 370 | 337 | 285 | ||
| 48 | 493 | 459 | 375 | 343 | 288 | ||
| 49 | 499 | 466 | 380 | 347 | 293 | ||
| 50 | 506 | 473 | 386 | 353 | 296 | ||
| 51 | 510 | 475 | 388 | 355 | 298 | ||
| 52 | 516 | 480 | 392 | 358 | 303 | ||
| 53 | 522 | 485 | 397 | 363 | 306 | ||
| 54 | 526 | 490 | 400 | 366 | 309 | ||
| 55 | 532 | 496 | 405 | 370 | 313 | ||
| 56 | 536 | 499 | 408 | 374 | 315 | ||
| 57 | 542 | 505 | 413 | 378 | 319 | ||
| 58 | 547 | 509 | 417 | 382 | 323 | ||
| 59 | 552 | 515 | 422 | 386 | 326 | ||
Discrete wired specification products have discrete wires soldered by Yokowo for the maximum number of pins for each body width.
Please order with board code “H“.
*10-color discrete wiring.
・Core diameter 0.24 mm, external insulation diameter 0.54 mm
Wire length 300 mm from board edge, ends stripped to length of 3 mm
● Volume discounts are available, based on the quantity purchased per order.
Please note that delivery times are longer for orders of 10 units or more.
●Contact probes and guides(manufactured to suit the specified number of pins) are available as repair parts.
>>Learn more
●Connector cables to this product are available.
>>Learn more
Product numbers differ by board
click on the picture to expand it
For cases involving mounting a connector for 0.3 pitch FFC
- There are two types of circuit boards: ones for connectors on which pins on the odd-numbered side are positioned at the front and ones for connectors on which pins on the even-numbered side are positioned at the front. Referring to the example below, append the corresponding circuit board symbol to the name of the product you are ordering.
Example
Specify symbol D if the odd-numbered sideis at the front (to the left in the diagram below)
CCSE-030S-25D
Specify symbol D if the odd-numbered side is at the front (to the left in the diagram below)
CCSE-030S-31R-ZZ
For cases involving discrete wiring or mounting a connector for 0.5 pitch FFC.
- No circuit board symbol needs to be specified. Please order using the conventional product no.
Example
CCSE-030S-25
For specifications in that discrete wiring is soldered by Yokowo for the maximum number of pins for each body width
- Add the board code “H” to the end of the product code when ordering.
Example
CCSE-030S-25H
(Wired with discrete wiring for 29 pins)
CCSE-030M-31H
(Wired with discrete wiring for 39 pins)
※Core diameter 0.24 mm, external insulation diameter 0.54 mm
Wire length 300 mm from board edge, ends stripped to length of 3 mm
On the Clip Connector Inquiry Sheet, please indicate your preferred method under the “Wiring method” column.
※Unless otherwise specified, the basic wiring pattern will be provided.