HOME > Microwave inspection tools > Prove Connector PC series/TRL calibration board for the probe connector SMA

probe connector series

Probe connector series

TRL calibration board for the probe connector SMA>>Click here

PC-V / PC-V-SR / PC-SMA/PC-SMA-SR / PC-CR

Using Probe Connectordownload

We were selling a product that corresponds to the 65GHz and 18GHz. This time,we will release a new product of 40GHz corresponding request from the market in many cases.
(Photo Product with a slide rail)

※Outline drawing PC-K · PC-K-SR and PC-SMA · PC-SMA-SR, the PC-V · PC-V-SR is the same.

Features

●This product can be easily connected to the end of a Microstrip board or coplanar board in lieu of a horizontally welded coaxial connector. ●The board to be tested is placed on the GND block which moves up and down and is then inserted and attached to the GND. ●The central line of the tool with spring, is connected to the signal line on the board to be tested. Regarding the board ground, the surface side is the receiving GND and the rear side connects to the tool with the GND block. ●The central line of the tool of the coaxial structure is output by the inner parts of the jig, and can be connected to a coaxial cable. ●Applicable board thickness: maximum 2.0mm ●GND block pressing force: 3 kgf ●The width of the tool is the same as the dimensions of the connector.
Can even be used according to the connector arrangement, even for contiguous board specifications.
When using an orthogonal, please refer to the minimum possible installation dimensions listed on left.

※This product is a special order can match the spacing of the GND signal line side.


Applications

●Module or device on estimation board for testing ・Inspection for product development ・Reliability Test for Module ・Sampling inspection of board

Comparison Chart

Item number PC-V PC-K PC-SMA
Output V connector K connector SMA connector
Measurable frequency,
65GHz 40GHz 18GHz
Central line ø0.22mm ø0.31mm ø0.5mm
Contact length 0.3mm 0.5mm 0.55mm

Details of the Slide Rail

●For improved work operations, the main body of the tool is installed with a slide rail. ●Even when the rail is fixed to the main body, the width is the same as the coaxial connector, namely 12.7 mm. ●The slide rail has a lock function to anchor the main body of the tool to the top of the rail. ●Since the main body of the tool can move forward and back alongside the slide rail, even for installation of the board to be measured or when the outer dimensions of each board vary slightly, the main body of the tool can be easily brought close to the board to be measured. ●If the front and back position of the tool can be determined, the main body on the rail is fixed by pulling the lever, and stable and continuous measurement is possible. ●It will become a single straight rail by adjusting the dovetail groove in front and back of the slide rail, and can be used for the measuring signal line allocated in the opposed position on the board to be measured. ●By using the dovetail grooves on side of the slide rail, each slide rail can be orthogonally connected to each other. The slide rail also slide to right and left along the side dovetail grooves. As a result, changes in the size of the measuring board can be handled by combining the slide rail and front and back slide of the tool main body on the rail, and even if several signal lines are allocated someplace on the side, the tool core line can be connected at a right angle.
・Please use the slide rail by attaching it to the anchored table (*Please prepare the anchor table on your own).


using probe connector /slide rall

top of page

Test Data

[PC-V]

Click on the picture to expand it

【NEW】PC-K:Measured data of mounting and dismounting of the board 10 times, viewed without using a microscope, etc,

拡大表示

[PC-SMA]

Click on the picture to expand it

price list

Product Product No. Package
Unit
Unit Price (US $) per Order
1–4 units 5–9 units 10–19 units 20units or more
Probe Connector V PC-V 1 unit 1,917 1,895 1,873 1,839
PC-V with Slide Rail PC-V-SR 1 unit 2,195 2,173 2,150 2,117
Probe Connector K【New】 PC-K 1 unit 1,728 1,589 1,567 1,545
PC-K with Slide Rail【New】 PC-K-SR 1 unit 2,000 1,867 1,845 1,823
Probe Connector SMA
Price revision
PC-SMA 1 unit 823 812 778 767
PC-SMA with Slide Rail
Price revision
PC-SMA-SR 1 unit 1,100 1,089 1,056 1,045
Center Rail PC-CR 1 unit 56 - - -

●We offer discounted price for quantity orders. ●These products are intended for commercial customers, so prices exclude sales taxes. ●To price changes than The order was received on March 1, 2014.

 

top ofpage

TRL calibration board for the probe connector SMA

PC-SMA-TRL-CP

same day

>>Click here for the Probe connector series

PC-SMA-TRL-CP

Primary board dimensions ( board thickness, 1mm )

Features

●This board set is used to calibrate the characteristics of probe connector SMA in the range from the board contact part to the connector. ●TRL calibration makes it possible to obtain good approximations of the intrinsic characteristics of a measured object. ●The products presented here are used for coplanar lines. ●This board was designed for use with the probe connector SMA.

Features

●This TRL calibration board is used to obtain the intrinsic characteristics of a measured object via the probe connector SMA.

Click on the picture to expand it

Price list

Product Product No. Packing unit Set Price (US $) per Order Applications
1 set 2-4 sets 5sets
PC-SMA-TRL-CP PC-SMA-TRL-CP 1 set 356 345 323 Coplanar

The board set consists of THRU, REFLECT, LINE1, LINE2, and LINE3. ●Please specify the product number when ordering this product. ●We offer discounted price for quantity orders. ●These products are intended for commercial customers, so prices exclude sales taxes.

 

Lineup

  • Function probe
  • Microwave Compornent
  • Probe Connector
    • Probe Connector
    • TRL calibration board for the probe connector SMA
  • Giga Holder
    • Giga Holder
    • Option for Giga Holder
  • RF Test Table
  • Double Probing Table
  • Giga Cable
    • GC Series
    • GCNS Series
    • SC Series

top of page