HOME >  Flex Circuit Inspection Tools INDEX > Clip connector CCSS series

CCSE series

CCSS series

CCSS series

genaral specification4days

product overview

■This clip connector is intended for installation sites that restrict inspection device. ■This clip connector is intended for situations in which conventional clip connectors are too long or are difficult to incorporate in the inspection device, or where insufficient installation space is available for inspections using the cell method. ■In addition, if you need to insert a flexible cable from above, you can arrange to lower the position of the item to be inspected by orienting the clip in a horizontal configuration. ■Similar to the Just Fit Clip, the width can be cut as determined by the number of pins, so that you can also use closely aligned flexible cables or flexible cables in a confined space.

usage examples

Relationship between Specified Pin Number and Body Width

Relationship between Specified Pin Number and Body Width

●Body width (dimension A) differs depending on the specified number of pins. Please refer to the table below.

*The probe and guide configuration for this product is designed to suit the specified number of pins
with the center serving as the reference point.
Please contact us for details.

top of page

CCAC series lineup

●Click the product no. to see more information about each product.

0.3mm pitch

Flex(FPC) cable and discrete wiring type
Pitch Matching pin number Dmension A Product no. Wiring method
Discrete Connector
Pre-wired Wired by customer FRC Mounting connector Mounted by customer
0.3mm 6 to 10 pins8mm CCSS-030-pin number×××
11 to 19 pins10mm
20 to 25 pins12mm
26 to 31 pins14mm
32 to 39 pins17mm

0.4mm pitch

Flex(FPC) cable and discrete wiring type
Pitch Matching pin number Dmension A Product no. Wiring method
Discrete Connector
Pre-wired Wired by customer FRC Mounting connector Mounted by customer
0.4mm4 to 33 pins 17mmCCSS-040-pin number×××

0.5mm pitch

Flex(FPC) cable and discrete wiring type
Pitch Matching pin number Dmension A Product no. Wiring method
Discrete Connector
Pre-wired Wired by customer FRC Mounting connector Mounted by customer
0.5mm4 to 7 pins8mmCCSS-050-pin number×××
8 to 12 pins10mm
13 to 15 pins12mm
16 to 19 pins14mm
20 to 24 pins17mm

※The discrete wiring specification requires an increase in the body width of about 4 mm for the rear portion.

drawing content

Lineup

  • 0.2mm
    • CCJF-020M series
  • 0.25mm
    • CCJF-025M series
  • 0.3mm
  • 0.4mm
  • 0.5mm
  • 0.8mm
  • 1.0mm
  • 1.25mm
    • CCS-125 series
  • CCPO series
    • CCPO series
  • PFC series
  • repair parts
  • maintenance
  • Actuator Opener
  • HIROSE FH-58 Flex Insertion Tool

top od page