HOME >  Flex Circuit Inspection Tools INDEX > Clip connector CCJF series

CCJF series

CCJF series

CCJF series

genaral specification4days

0.2mm 0.25mm 0.3mm 0.4mm 0.5mm

product overview

■The Just Fit Clip supports several kinds of pitches―from 0.2 mm to 0.5 mm―allowing use for a wide range of customer needs. A 0.25-mm pitch has been added. ■Perfect width; the connector width is processed in increments to match each pin number. ■Because it uses a compact body, this ultra-compact series is ideal when interfering objects are present near or around the flexible wiring. ■Even the front of the clip body is cut, allowing use of the connector with shorter flexible cables. ■ The 0.5mm pitch connector has probes arranged in a single row, making it compatible even with flexible cables with short electrodes.

Usage examples

Inspecting flexible cables located next to each other

Inspecting flexible cables located next to each other

Inspecting flexible cable located in narrow area

Can be fixed in the same way as the conventional standard product series (33 mm wide).

Relationship between Specified Pin Number and Body Width

Relationship between Specified Pin Number and Body Width

●Body width (dimension A) differs depending on the specified number of pins. Please refer to the table below. ●When the shape of the flexible cable is straight, the body width as shown in the following table applies.
Because the width varies according to the shape of the flexible cable, please contact us for details.

※For products in this series probes are configured and guides are fabricated with respect to the center of the connector to suit the specified number of pins; however, it is possible to perform an inspection on only one side in a confined space by pulling the probe array to one side. Please contact us for details.

top of page

CCJF series lineup

●Click the product no. to see more information about each product.

0.2mmpitch

Flex(FPC) Wiring Type
Pitch Matching pin number Dmension A Product no. Wiring method
Discrete Connector
Pre-wired Wired by customer FRC Mounting connector Mounted by customer
0.2mm 17 to 101 pins28mm CCJF-020M-pin number×××

0.25mm pitch

Flex(FPC) Wiring Type
Pitch Matching pin number Dmension A Product no. Wiring method
Discrete Connector
Pre-wired Wired by customer FRC Mounting connector Mounted by customer
0.25mm 17 to 40 pins19mmCCJF-025M-pin number××
41 to 79 pins24mm

FRC

Pitch Matching pin number Dmension A Product no. Wiring method
Discrete Connector
Pre-wired Wired by customer FRC Mounting connector Mounted by customer
0.25mm 17 to 40 pins19mmCCJF-025M-pin number-FRC××××
41 to 79 pins 24mm

0.3mm pitch

Flex(FPC) Wiring Type
Pitch Matching pin number Dmension A Product no. Wiring method
Discrete Connector
Pre-wired Wired by customer FRC Mounting connector Mounted by customer
0.3mm6 to 10 pins8mmCCJF-030-pin number
11 to 19 pins10mm
20 to 25 pins12mm
26 to 31 pins14mm
32 to 39 pins17mm
40 to 47 pins19mmCCJF-030M-pin number××
48 to 61 pins24mm
62 to 76 pins28mm
77 to 91 pins32mm

※The discrete wiring specification requires an increase in the body width of about 4 mm for the rear portion.

0.4mm pitch

Flex(FPC) Wiring Type
Pitch Matching pin number Dmension A Product no. Wiring method
Discrete Connector
Pre-wired Wired by customer FRC Mounting connector Mounted by customer
0.4mm4 to 33 pins 17mmCCJF-040-pin number×

※Flex(FPC) printed circuit opening width: 17 mm for all pin numbers
except for the rear opening width, which is 21 mm. ※Orders for the 0.4 mm pitch CCJF series are not width-processed. Please contact us if you are interested in the 0.4 mm pitch CCJF series connectors that are width-processed each time.

0.5mm pitch

Flex(FPC) Wiring Type
Pitch Matching pin number Dmension A Product no. Wiring method
Discrete Connector
Pre-wired Wired by customer FRC Mounting connector Mounted by customer
0.5mm4 to 7 pins8mmCCJF-050-pin number×
8 to 12 pins10mm
13 to 15 pins12mm
16 to 19 pins14mm
20 to 24 pins17mm
25 to 38 pins24mmCCJF-050M-pin number
39 to 46 pins28mm
47 to 54 pins32mm

※The discrete wiring specification requires an increase in the body width of about 4 mm for the rear portion.

drawing window

Lineup

  • 0.2mm
    • CCJF-020M series
  • 0.25mm
    • CCJF-025M series
  • 0.3mm
  • 0.4mm
  • 0.5mm
  • 0.8mm
  • 1.0mm
  • 1.25mm
    • CCS-125 series
  • CCPO series
    • CCPO series
  • PFC series
  • repair parts
  • maintenance
  • Actuator Opener
  • HIROSE FH-58 Flex Insertion Tool

Top of Page