HOME >  Flex Circuit Inspection Tools INDEX > Push-Pull Flex(FPC) Cable

PFC series

PFC series

Push-Pull Flex(FPC) Cable Lineup>>Click Here

;product over view

For plugging into board-mounted connectors and flexible wiring

■The PFC Series refers to a range of flexible cables having a structure with electrodes that are durable against abrasion. They remain durable even when plugging and unplugging without releasing the lock to the flexible connector mounted on the board. ■Because the durable flexible cables are made with polyimide, you can use the wiring and extension between the jigs with confidence. ■Short lead time/Sold as 10-cable set ■Length of reinforcement board : 20 mm
(A sufficient length as a handle is given, and thin products that is 0.3 mm pitch is made of a material that is thin but durable.)
■Cable length: 150 mm
(A length appropriate for wiring and/or extension is given.)
■Multipolar capacity: up to 60 poles for 0.5 mm pitch and up to 65 poles for 0.3 mm
*Products can also be made to order for other pin counts. Contact Yokowo for more information.
■Wear-resistant pin construction allows repeated FFC/FPC connector insertion/disconnection. (Excluding non-ZIF types)
Durability: 1,000 cycles for 0.3 mm pitch, 3,000 cycles for 0.5 mm pitch
※Insertion/disconnection tests have not been performed for connectors of FPC thickness of 0.18 mm or less for the PFC-030 Series.

Yokowo test details

New FPC connectors corresponding to the manufacturer's recommended flexible board thickness of 0.15 mm and 0.2 mm for 0.3 mm pitch and 0.25 mm and 0.3 mm for 0.5 mm pitch are affixed to a proud plate and inserted and disconnected 10 times. The connectors are replaced with new connectors after checking conductivity, and the test is repeated with the number of insertion/disconnection cycles recorded for each pitch and board until conductivity fails. The boards are inserted and disconnected manually, taking care to insert and disconnect horizontally. The boards are inserted with the connector opened and disconnected with the connector closed. (Durability figures are guidelines, not guarantees. Actual performance will depend on connector specifications and conditions of use. Hold connectors close to the pins when inserting and disconnecting.)

※Insertion/disconnection tests have not been performed for connectors of FPC thickness of 0.18 mm or less for the PFC-030 Series.
※If you want to use the PFC series to the connector of the terminal there is no spring property, there is a possibility that the extremely poor durability. Please check the connector in advance.

page of top

usage examples

 
。

lineup

●Click on a product number to display the relevant product information page
Accommodates pitches of 0.3 mm and 0.5 mm. Very small pins and multipolar configurations are available.

pitch Applicable pin number Product No.
0.3mm 11~65pins(odd numbers only) PFC-030
0.5mm 6~60pins PFC-050

※Products can also be made to order for other pin counts. Contact Yokowo for more information.

Flex(FPC) cable and discrete wiring converter boards PFEX series
Flex(FPC) cable extension connector boards SFIB series

※Flex(FPC) connectors must be mounted by the customer.

lineup

  • 0.2mm
    • CCJF-020M series
  • 0.25mm
    • CCJF-025M series
  • 0.3mm
  • 0.4mm
  • 0.5mm
  • 0.8mm
  • 1.0mm
  • 1.25mm
    • CCS-125 series
  • CCPO series
    • CCPO series
  • PFC series
    • PFC030 series
    • PFC00 series
    • PFEX/SFIB series
  • repair parts
  • maintenance
  • Actuator Opener
  • HIROSE FH-58 Flex Insertion Tool

top of page